Multi Effect Evaporator- Manufacturer,Supplier and Exporter in Ambala

Product Code : EL-HTLE-11892

Multi Effect Evaporator- Engineering Teaching Equipment
Evaporation deals with the concentration of a non-volatile Solute from a solution by the removal of required amount of volatile solvent. 
Usually the solvent is water. 
By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the Vapour is discarded. L
ung tube evaporators are usually used for the concentration of foamy liquids. 
The set-up is consists of two evaporators fitted in series. 
Each is made up of Stainless Steel tubes surrounded by a Stainless Steel jacket and fitted with accumulator. 
Dilute solution is feed to the first evaporator. 
Steam from. a steam generator is supplied to evaporator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent produced in first evaporator are supplied to the second evaporator. 
The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.
To concentrate a solution and to evaluate the following at steady state:
Material and Heat Balance
Economy and the capacity of the evaporator for different feeding arrangement
Overall heat transfer co-efficient.
Utilities Required:
Water supply 10 lit/min (approx.) and Drain
Electricity Supply: 1 Phase, 220 V AC, 3-6 kW
Required Chemicals

Contact School Lab Equipments for your Educational School Science Lab Equipments. We are best educational equipment manufacturers india, educational equipments, educational equipments exporter, educational equipments exporters, educational equipments for science labs, educational lab equipment export in india


Office Address

Works: Bara Hindu Rao, Pahari Dhiraj, Sadar Bazar,
Delhi -110006

[email protected]

Follow Us