Fogging Tester Manufacturer,Supplier and Exporter in Ambala


Product Code : EL-TE-13263
schoollab Equipments Ambala is a leading Fogging Tester Manufacturer,and suppliers in Ambala, Fogging Tester Manufacturer,and suppliers in South Africa, Fogging Tester Algeria (Algiers), Fogging Tester Angola (Luanda), Fogging Tester Argentina (Buenos Aires), Fogging Tester Armenia (Yerevan), Fogging Tester Australia (Canberra), Fogging Tester Austria (Vienna), Bahrain (Manama), Bangladesh (Dhaka), Bhutan (Thimphu), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Montenegro (Podgorica), Morocco (Rabat), Mozambique (Maputo), Myanmar (Naypyidaw), Namibia (Windhoek), Nepal (Kathmandu), New Zealand (Wellington), Nigeria (Abuja), Oman (Muscat), Palestine (Ramallah), Panama (Panama City), Papua New Guinea (Port Moresby), Paraguay (Asunción), Peru (Lima), Philippines (Manila)¸ Portugal (Lisbon), Qatar (Doha), Rwanda (Kigali), Saudi Arabia (Riyadh), Senegal (Dakar), Serbia (Belgrade), Sierra Leone (Freetown), Slovakia (Bratislava), South Africa (Cape Town) (Pretoria) (Bloemfontein), South Sudan (Juba), Spain (Madrid), Sri Lanka (Sri Jayawardenepura Kotte) (Colombo), Sudan (Khartoum), Syria (Damascus), Tanzania (Dodoma), Thailand (Bangkok), Togo (Lomé), Tonga (Nuku'alofa), Trinidad and Tobago (Port of Spain), Tunisia (Tunis), Turkey (Ankara), Turkmenistan (Ashgabat), Uganda (Kampala), United Arab Emirates (Abu Dhabi), United Kingdom (London), United States (Washington, D.C.).

Fogging Tester
The Fogging Tester is specially designed equipment for testing the fogging characteristics or VOCs of leather, plastics, vinyl and textiles for automotive, aerospace and other transportation vehicles.
This fogging tester comprises of following equipment
1) Thermostatically Controlled Bath : Available with all safety devices for over- heating, this is designed to operate at upto 130°C. 
All the parameters like bath capacity, circulation system and heating system work in coordination as to control the temperature within ± 0.5°C throughout the bath. 
A slow and uniform speed is maintaining for the agitation of bath.
Passing liquid in the beakers have different speeds and this will cause differentiation in the temperatures of different beakers.
The distance between the bath fluid and lower surface of the glass plate should be 60 ± 2 mm.
2) Cooling Plates : Hollow in structure, these cooling plates are made from rust proof metals with aluminum on the side facing the glass plate. 
These are specially designed for keeping the glass plates cool. 
The cooling water flows through whole of the plate with two connections. 
A minimum weight of 1kg should be maintained in the cooling plate filled with to overcome the buoyancy of the beaker in the bath. For each different beaker, a separate cooling plate is used. 
Designing of the cooling plates and water thermostat is done in such a way that the mean temperature of water remains at 21ºC and the temperature difference between the inlet and outlet does not exceed 1ºC.
3) Flat bottomed beakers : These are made from heat-resistant glass
4) Metal rings : Made from rust proof steel, these rings are used to keep the test pieces flat.
5) Sealing rings : These rings are L- shapes or circular, made from silicone or fluoro rubber.
6) Float-glass plates : These plates are available in residential or windshield window quality for condensation of the fogging. Available in tin and non- tin finish, these glass plates have reflecto meter values within ± 2% units.
7) Filter paper
8) Aluminum foil discs: These discs are stored in a dedicator for avoiding condensation and contamination
9) Reflectometer: also known as gloss meter
10) Spacer: This type of spacer is specially installed during relectometer measurements to prevent contact with the condensate on the glass plate. These are made from high grade materials such as paper or plastic with a circular hole for the measurements.
11) Dishwasher
12) Balance
13) Polyethylene gloves
14) Desiccators: These are available with suitable drying material
External diameter: 80mm
Internal diameter: 74mm
Height: 10mm
Mass: 55±1g
Inner diameter: 90mm to 95mm
Thickness: 2mm to 4mm
Hardness: 50 IRHD to 70 IRHD
Thickness: (3 ± 0.2) mm
Square with minimum dimensions: (110×100) mm
Circular with diameter: 103mm
Diameter: 110mm
Mass per unit surface: 90 g/m2
Thickness: 0.03mm
Contact School Lab Equipments Ambala for your Educational School Science Lab Equipments. We are best engineering lab equipments manufacturers, engineering lab equipments manufacturers, physics lab engineering equipment exporter, engineering educational equipment india, engineering lab equipments suppliers, engineering educational equipments supplier in india


Office Address

Works: Bara Hindu Rao, Pahari Dhiraj, Sadar Bazar,
Delhi -110006

[email protected]

Follow Us